Programmable Slaves
CPM2C-S1@0C-DRT
Slaves with the Complex Functionality Needed CPM2C-S1 PDF
for Distributed CPM2C-S1 datasheet Blocks
Programmable Slaves combine devices, such as sensors and actuators, into one
functional CPM2C-S1 PDF unit that is treated as a DeviceNet CPM2C-S1 datasheet slave.
Programmable
CPM2C-S1 CPM2C-S1 PDF Slaves greatly facilitate device distribution and functional organization.
They help standardize programming between units and reduce the amount of
programming required at the master.
I/O and operational checks can be performed for each functional unit, rather than waiting
for final system assembly, as with conventional distributed I/O systems.
◇A Programmable Slave can be programmed from a CX-Programmer up to 3 network levels away.
(Includes the DeviceNet network itself. Possible only with CX-Programmer Ver. 2.1 or later and a
Programmable Slave Ver. 1.04 or later.)
◇DeviceNet Slave Functions
Multiword I/O links and explicit messages are used to control slaves from the master. Log data for communications can be sent in one
operation whenever necessary using explicit messages.
◇CompoBus/S Master Functions
Less wiring is required for terminal block expansions, connections to remote devices (such as signal lights or pushbutton switches), and
connections to pneumatic valves and other non-OMRON products. Connect using VCTF cable or Special Flat Cable, which allows easy
branching.
◇RS-232C Communications
Connected to bar code readers, Programmable Terminals, and other devices, the Programmable Slave processes data locally to reduce
the load on the master.
◇Expansion Units (3 max.)
Just one Unit is required for each distributed block, reducing the number of iinterfaces CPM2C-S1 datasheet CPM2C-S1 datasheet for multipoint communications to, in turn, reduce
costs.