Mitsubishi Energy Measuring EMU2-RD4-C-4W Manual PDF

Fit the sensor to the cable of the circuit to be measured in accordance with EMU2-RD4-C-4W EMU2-RD4-C-4W Manual the
following procedures.
1) EMU2-RD4-C-4W PDF Remove the band ○1 in the arrow (upward) direction, and remove the EMU2-RD4-C-4W Manual core
cover.
2) EMU2-RD4-C-4W PDF Remove the terminal cover, and set the secondary short-circuiting switch to
“Short.”
3) Loosen the screw ○2 , EMU2-RD4-C-4W Installation Manual(Detailed edition) open the core band, and remove the core. Take care
that dust does not adhere to the core.
4) Loosen EMU2-RD4-C-4W Installation Manual(Detailed edition) the screws ○3 , and fit the main body onto the cable. Then, tighten
the screws ○3 to secure EMU2-RD4-C-4W Installation Manual(Detailed edition) the cable using the cable direct fitting. Tighten the
screws to such an extent that the direct fitting is not bent.
5) Set “K” on the removed core and “K” on the main body on the same side,
return the core as it was, and tighten the core band with the screw ○2 .
6) Fit the core cover, and secure it with the band ○1 .
7) After connecting the secondary terminal and the multi-circuit power
measuring unit, set the secondary short-circuiting switch to “Open,” and fit
the terminal cover.


Mitsubishi EMU2-RD4-C-4W Energy Measuring Unit Manual PDF.
Mitsubishi EMU2-RD7-C Manual EMU2-RD7-C PDF.
Mitsubishi EMU2-D655 EMU2-RD4-C-4W Manual Manual Display Module EMU2-D65 PDF.
Mitsubishi EMU2-RD3-C PDF Manuall.
Mitsubishi EMU2-RD4-C-4W PDF EMU2-RD3-F Energy Measuring Manual PDF.