Mitsubishi MR-CR55K_ Manual AC Servo MR-CR55K_ PDF

(4) When using [Pr. 13 Position loop gain 1] of MR-J4-_B_-RJ020 and MR-J2S-_B_ MR-CR55K_ PDF simultaneously such as
in the interpolation mode, check MR-CR55K_ Manual droop MR-CR55K_ MR-CR55K_ PDF pulses for each axis and readjust gains as necessary. MR-CR55K_ Manual

(5) MR-CR55K_ PDF MR-J4-_B_-RJ020 servo amplifier is not compatible with adaptive vibration suppression control.

(6) MR-CR55K_ Installation Manual Power is not supplied from the SSCNET cable connection connector to the encoder. When using the
MR-J4-_B_-RJ020 MR-CR55K_ Installation Manual servo amplifier in absolute position detection system, always connect a battery to MR-CR55K_ Installation Manual the
CN4 connector.

(7) Setting a servo amplifier of 7 kW or less to the J2S compatibility mode will be compatible with the fully
closed loop system. In the fully closed loop control mode, when an HG series servo motor is used for the
load-side encoder, the resolution of the load-side encoder will be 131072 pulses/rev (17 bits) as in the
case of the servo motor side. Refer to chapter 15 for details.
Mitsubishi MR-CR55K4 Instructions and Cautions for Safe Use of AC Seervos MR-CR55K_ Manual PDF.
Mitsubishi MR-CR55K_ PDF Manual Servo.
Mitsubishi MR-CR55K Innstructions MR-CR55K_ PDF and Cautions for Safe Use of AC Servos PDF.