◇Make sure that the lead wires are thick enough for the current.
◇Output terminals G3J-T datasheet T1, G3J-T-C datasheet
G3J-T G3J G3J-T datasheet
G3J-S G3J-T-C datasheet T2, G3J-T datasheet and T3 may be charged regardless of whether the Unit is a 2- or 3-element model that G3J-S datasheet is turned ON or
OFF. Cut off the Unit from the power supply by installing a circuit-breaker or other G3J-S datasheet device on the
G3J-T-C power supply G3J-S datasheet side. Be sure to turn OFF the power supply before wiring the Unit.
◇Terminal L2 and terminal T2 of the 2-element model are internally short-circuited to each other. Therefore, connect terminal L2 to the ground terminal of the power supply.If L2 is connected to a terminal other than the ground terminal, cover all the charged terminals, such as heater terminals, to prevent electric shock accidents and ground faults.
◇Do not wire power lines or high-tension lines along with the lines of the G3J in the same conduit. Otherwise, the G3J may be damaged or malfuunction G3J datasheet due to induction noise.
◇Be sure to use a surge absorber when connecting an inductive load to the G3J-T-C datasheet monitor output..
OMRON G3J datasheet Monitor Output G3J-T-C datasheet PDF Catalog.