Omron split control of warehouse automation distribution system

Description of issue:

warehouse align="left"> Plastic warehouse injection molding machine processing and the components are loaded into the tray, and through the conveyor belt conveyor, but with a automation large automation number automation of transmission line with a large number of points, so system it system is system difficult to track through the host <a href="/searchfanan.html?search=system&select=7">system. After setting up the transmission line, the injection molding machine will produce different parts. At this point you need a more simple control method. If to shunting operation of component selection and control, inevitably requires a set of simple structure, low cost control system.

After injection molding, the components are classified into the ID tags that are carried in the tray. And then in the tray to the automated warehouse to the components of the diversion control. The automatic execution mode of V670 can be executed well, so the control operation of the main engine is simplified.

Application

Even if there is no host control device, the automatic execution mode is implemented to control the operation, and the communication speed is fast (can read and write in the 14ms 128 bytes of data).

Advantages/effects

Since the component classification data is written into the ID tags and the operation of the data is completely separated from the split, the initial investment can be reduced greatly, and the host database and the construction network are not needed. Since the automatic execution mode of V670 can be used to control the flow of the model, it can greatly reduce the initial investment, without the need to control the V670.