Mennekes Wall mounted inlet 346
Product Name:Wall mounted inlet
Part No.:346.
Ampere:32A.
Poles:4p.
Voltage:110V.
Earth position:4h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
cable entry also possible on the back side.
enclosure base with stamped recess for quick cutting out.
Product Name:Wall mounted inlet
Part No.:346.
Ampere:32A.
Poles:4p.
Voltage:110V.
Earth position:4h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
cable entry also possible on the back side.
enclosure base with stamped recess for quick cutting out.
Mennekes Panel mounted inlet 461
Product Name:Panel mounted inlet
Part No.:461.
Ampere:16A.
Poles:5p.
Voltage:230V.
Earth position:9h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP67.
screw terminals.
with hinged lid.
Product Name:Panel mounted inlet
Part No.:461.
Ampere:16A.
Poles:5p.
Voltage:230V.
Earth position:9h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP67.
screw terminals.
with hinged lid.
Mennekes Panel mounted receptacle 20146
Product Name:Panel mounted receptacle
Part No.:20146.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position :6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP44.
screw terminals.
standard flange dimensions.
uniform fixing hole spacing.
15° inclination.
Product Name:Panel mounted receptacle
Part No.:20146.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position :6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP44.
screw terminals.
standard flange dimensions.
uniform fixing hole spacing.
15° inclination.
Mennekes Cepex panel mounted receptacle 4146
Product Name:Cepex panel mounted receptacle
Part No.:4146.
Ampere:32A.
Poles:3p.
Voltage:110V.
Earth position: 4h.
Hertz 50-60Hz.
Protection type IP44.
scscrew terminals.
with labelling field.
suitable for installation in cable ducts and columns.
Product Name:Cepex panel mounted receptacle
Part No.:4146.
Ampere:32A.
Poles:3p.
Voltage:110V.
Earth position: 4h.
Hertz 50-60Hz.
Protection type IP44.
scscrew terminals.
with labelling field.
suitable for installation in cable ducts and columns.
Mennekes Plug PowerTOP 3946
Product Name:Plug PowerTOP?
Part No.:3946.
Ampere:32A.
Poles:4p.
Voltage:230V.
Earth position:9h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
highly heat resistant contact carrier.
nickel plated contacts.
cable gland and external cable grip.
Product Name:Plug PowerTOP?
Part No.:3946.
Ampere:32A.
Poles:4p.
Voltage:230V.
Earth position:9h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
highly heat resistant contact carrier.
nickel plated contacts.
cable gland and external cable grip.
Mennekes Receptacle 21468
Product Name:Receptacles
Part No.:21468.
Ampere:125A.
Poles:5p.
Voltage:400V.
Earth position:6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type:IP67.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
products with pilot contact: part no. + index P.
Product Name:Receptacles
Part No.:21468.
Ampere:125A.
Poles:5p.
Voltage:400V.
Earth position:6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type:IP67.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
products with pilot contact: part no. + index P.
Mennekes Wall mounted receptacle 7246
Product Name:Wall mounted receptacle
Part No.:7246.
Ampere:16A.
Poles:4p.
Voltage:400V.
Earth position :6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP67.
screw terminals.
switched.
mechanical DUO-interlock.
RCD (0.03A).
other leakage current ratings on request.
receptacles can be padlocked.
Product Name:Wall mounted receptacle
Part No.:7246.
Ampere:16A.
Poles:4p.
Voltage:400V.
Earth position :6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP67.
screw terminals.
switched.
mechanical DUO-interlock.
RCD (0.03A).
other leakage current ratings on request.
receptacles can be padlocked.
Mennekes Panel mounted receptacle 1646
Product Name:Panel mounted receptacle with TwinCONTACT
Part No.:1646.
Ampere:16A.
Poles:5p.
Voltage:>50-500V.
Earth position :2h.
Hertz>300-500 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact: standrad.
Protection type IP44 .
screwless spring terminals.
suitable for through wiring.
flange: 73,5 x 64 mm.
fixing hole spacing: 60 x 52 mm.
20° inclination.
Product Name:Panel mounted receptacle with TwinCONTACT
Part No.:1646.
Ampere:16A.
Poles:5p.
Voltage:>50-500V.
Earth position :2h.
Hertz>300-500 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact: standrad.
Protection type IP44 .
screwless spring terminals.
suitable for through wiring.
flange: 73,5 x 64 mm.
fixing hole spacing: 60 x 52 mm.
20° inclination.
ABB Inverter ACS355-03X-02A4-4
Product Name: Inverter.
Model: ACS355-03X-02A4-4.
3-phase AC supply, 380 to 480 V.
This code states the factory installed SW variants to the drive.
Typical motor power in 460 V at normal use: 1.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 2.4A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 0.75kw.
Product Name: Inverter.
Model: ACS355-03X-02A4-4.
3-phase AC supply, 380 to 480 V.
This code states the factory installed SW variants to the drive.
Typical motor power in 460 V at normal use: 1.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 2.4A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 0.75kw.
ABB Inverter ACS355-03X-24A4-2
Product Name: Inverter.
Model: ACS355-03X-24A4-2.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 5.5kw.
Typical motor power in 460 V at normal use: 7.5hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 24.4A.
Frame size: R3.
Current rating represents the rated continuous drive output current inside the drive specification.
3-phase AC supply, 200 to 240 V.
This code states the factory installed SW variants to the drive.
Product Name: Inverter.
Model: ACS355-03X-24A4-2.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 5.5kw.
Typical motor power in 460 V at normal use: 7.5hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 24.4A.
Frame size: R3.
Current rating represents the rated continuous drive output current inside the drive specification.
3-phase AC supply, 200 to 240 V.
This code states the factory installed SW variants to the drive.
ABB Inverter ACS355-03X-13A3-2
Product Name: Inverter.
Model: ACS355-03X-13A3-2.
3-phase AC supply, 200 to 240 V.
Typical motor power in 400 V at normal use: 3.0kw.
Typical motor power in 460 V at normal use: 3.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 13.3A.
This code states the factory installed SW variants to the drive.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Frame size: R2.
Product Name: Inverter.
Model: ACS355-03X-13A3-2.
3-phase AC supply, 200 to 240 V.
Typical motor power in 400 V at normal use: 3.0kw.
Typical motor power in 460 V at normal use: 3.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 13.3A.
This code states the factory installed SW variants to the drive.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Frame size: R2.