ABB Inverter ACS355-03X-23A1-4
Product Name: Inverter.
Model: ACS355-03X-23A1-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 11.0kw.
Frame size: R3.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 23.1A.
Typical motor power in 460 V at normal use: 15.0hp.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
Product Name: Inverter.
Model: ACS355-03X-23A1-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 11.0kw.
Frame size: R3.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 23.1A.
Typical motor power in 460 V at normal use: 15.0hp.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
ABB Inverter ACS355-03X-44A0-4
Product Name: Inverter.
Model: ACS355-03X-44A0-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 22.0kw.
Typical motor power in 460 V at normal use: 30.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 44.0A.
This code states the factory installed SW variants to the drive.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Frame size: R4.
Product Name: Inverter.
Model: ACS355-03X-44A0-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 22.0kw.
Typical motor power in 460 V at normal use: 30.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 44.0A.
This code states the factory installed SW variants to the drive.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Frame size: R4.
ABB Inverter ACS800-01-0011-2
Product Name: Inverter.
Model: ACS800-01-0011-2.
UN = 230 V (Range 208 to 240 V). The power ratings are valid at nominal voltage 230 V.
Rated current available continuously without overloadability at 40 °C: 34A
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 46A.
Typical motor power in no-overload use: 7.5KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 31A.
Typical motor power in light-overload use: 7.5Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 23A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Frame size: R3.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in heavy-duty use: 5.5KW.
Product Name: Inverter.
Model: ACS800-01-0011-2.
UN = 230 V (Range 208 to 240 V). The power ratings are valid at nominal voltage 230 V.
Rated current available continuously without overloadability at 40 °C: 34A
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 46A.
Typical motor power in no-overload use: 7.5KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 31A.
Typical motor power in light-overload use: 7.5Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 23A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Frame size: R3.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in heavy-duty use: 5.5KW.
Mennekes Panel mounted receptacle 1462
Product Name:Panel mounted receptacle
Part No.:1462.
Ampere:16A.
Poles:3p.
Voltage:110V.
Earth position :4h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP44.
screw terminals.
suitable for through wiring.
20° inclination.
Product Name:Panel mounted receptacle
Part No.:1462.
Ampere:16A.
Poles:3p.
Voltage:110V.
Earth position :4h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP44.
screw terminals.
suitable for through wiring.
20° inclination.
Mennekes Panel mounted receptacle 1465
Product Name:Panel mounted receptacle
Part No.:1465.
Ampere:16A.
Poles:4p.
Voltage:110V.
Earth position :4h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP44.
screw terminals.
suitable for through wiring.
20° inclination.
Product Name:Panel mounted receptacle
Part No.:1465.
Ampere:16A.
Poles:4p.
Voltage:110V.
Earth position :4h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP44.
screw terminals.
suitable for through wiring.
20° inclination.
Mennekes Panel mounted receptacle 1460
Product Name:Panel mounted receptacle
Part No.:1460.
Ampere:125A.
Poles:5p.
Voltage:230V.
Earth position :9h.
Hertz 50-60Hz.
Connection technology:screw terminals., TorsionSpringCONTACT.
Contact: standrad.
Protection type IP67.
screw terminals.
TorsionSpringCONTACT.
straight.
receptacles with pilot contact: part no. + index P.
Product Name:Panel mounted receptacle
Part No.:1460.
Ampere:125A.
Poles:5p.
Voltage:230V.
Earth position :9h.
Hertz 50-60Hz.
Connection technology:screw terminals., TorsionSpringCONTACT.
Contact: standrad.
Protection type IP67.
screw terminals.
TorsionSpringCONTACT.
straight.
receptacles with pilot contact: part no. + index P.