OMRON Triac Output Unit C200H-OA122-E
8 pts, 1.2 A, 120 VAC
8 pts, 1.2 A, 120 VAC
OMRON Triac Output Unit C200H-OA121-E
8 pts, 1 A, 120 VAC.
8 pts, 1 A, 120 VAC.
OMRON I/O Power Supply Unit CV500-IPS01
Model : CV500-IPS01.
Input: 100 to 120/200 to 240 VAC Output: 2A, 24 VDC
Model : CV500-IPS01.
Input: 100 to 120/200 to 240 VAC Output: 2A, 24 VDC
Mitsubishi Inverter FR-A840-12120-2-60
Product Name: Inverter.
Model: FR-A840-12120-2-60.
500KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity(SLD): 630 kW.
Rated input AC voltage/frequency: Three-phase 380 to 500 V 50 Hz/60 Hz.
Cooling system: Forced air cooling.
Approx. mass: 243 Kg.
Product Name: Inverter.
Model: FR-A840-12120-2-60.
500KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity(SLD): 630 kW.
Rated input AC voltage/frequency: Three-phase 380 to 500 V 50 Hz/60 Hz.
Cooling system: Forced air cooling.
Approx. mass: 243 Kg.
ABB Inverter ACS800-01-0120-7
Product Name: Inverter.
Model: ACS800-01-0120-7.
UN = 690 V (Range 525 to 690 V). The power ratings are valid at nominal voltage 690 V.
Rated current available continuously without overloadability at 40 °C: 113A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 172A.
Typical motor power in no-overload use: 110KW
Frame size: R6.
Typical motor power in light-overload use: 90Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 86A.
Typical motor power in heavy-duty use: 75KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 108A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0120-7.
UN = 690 V (Range 525 to 690 V). The power ratings are valid at nominal voltage 690 V.
Rated current available continuously without overloadability at 40 °C: 113A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 172A.
Typical motor power in no-overload use: 110KW
Frame size: R6.
Typical motor power in light-overload use: 90Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 86A.
Typical motor power in heavy-duty use: 75KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 108A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
