Mitsubishi CPU A0J2HCPUR21
Product:CPU.
Model:A0J2HCPUR21.
Outline:No.ofI/Opoints:480points,no.ofI/Odevicepoints:480points,proGramcapacity:8ksteps,basicinstructionprocessingspeed(LDinstruction):1.25μs,RAMmemorycapacity:32KB,built-inpowersupply,
withcoaxialdatalinkfunction.
Product:CPU.
Model:A0J2HCPUR21.
Outline:No.ofI/Opoints:480points,no.ofI/Odevicepoints:480points,proGramcapacity:8ksteps,basicinstructionprocessingspeed(LDinstruction):1.25μs,RAMmemorycapacity:32KB,built-inpowersupply,
withcoaxialdatalinkfunction.
Mitsubishi Servo motor HG-SR52J
Product Name: Rotary servo motor.
Model: HG-SR52J.
Medium inertia, medium capacity.
Rated output: 0.5 kW.
Rated speed: 2000 r/min.
Oil seal: Installed.
Electromagnetic brake: None.
Product Name: Rotary servo motor.
Model: HG-SR52J.
Medium inertia, medium capacity.
Rated output: 0.5 kW.
Rated speed: 2000 r/min.
Oil seal: Installed.
Electromagnetic brake: None.
Mitsubishi Servo motor HG-SN202J-S100
Product Name: Rotary servo motor.
Model: HG-SN202J-S100.
Inertia/capacity: Medium inertia, medium capacity.
Rated output: 2.0 kW.
Rated speed: 2000 r/min.
Oil seal: Installed.
Electromagnetic brake: None.
Product Name: Rotary servo motor.
Model: HG-SN202J-S100.
Inertia/capacity: Medium inertia, medium capacity.
Rated output: 2.0 kW.
Rated speed: 2000 r/min.
Oil seal: Installed.
Electromagnetic brake: None.
Proface HMI(Control) LT3300-L1-D24-K
Product Name: HMI(Control).
Model: LT3300-L1-D24-K(sink).
Display Type and Size: Monochrome lcd(5.7in).
Graphic Display Resolution: 320*240 pixels(QVGA).
Backlight: whilte led.
Display Area: W115.2mm x H86.4mm [4.54in x 3.4in].
Built in DIO (Input): 16 points.
Built in DIO (Output): 16 points.
Touch Screen: Resistive Film(analog).
Display Colors: monochrome(16 levels).
Programming Memory: 6mb flash EPROM.
Input Voltage: 24 VDC.
Serial: RS232C/422/485.
Ethernet: yes.
I/O Expansion: 3 EXM Modules.
Product Name: HMI(Control).
Model: LT3300-L1-D24-K(sink).
Display Type and Size: Monochrome lcd(5.7in).
Graphic Display Resolution: 320*240 pixels(QVGA).
Backlight: whilte led.
Display Area: W115.2mm x H86.4mm [4.54in x 3.4in].
Built in DIO (Input): 16 points.
Built in DIO (Output): 16 points.
Touch Screen: Resistive Film(analog).
Display Colors: monochrome(16 levels).
Programming Memory: 6mb flash EPROM.
Input Voltage: 24 VDC.
Serial: RS232C/422/485.
Ethernet: yes.
I/O Expansion: 3 EXM Modules.
ABB Inverter ACS550-01-038A-4
Product Name: Inverter.
Model: ACS550-01-038A-4.
3-phase supply voltaGe 380 to 480 V.
Typical motor power in 400 V at heavy-duty use: 15KW.
Typical motor power in 400 V at normal use: 18.5kw.
Typical motor power in 460 V at normal use: 25hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 38A.
Wall-mounted units.
Typical motor power in 460 V at heavy-duty use: 20HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 31A.
Frame size: R3.
Product Name: Inverter.
Model: ACS550-01-038A-4.
3-phase supply voltaGe 380 to 480 V.
Typical motor power in 400 V at heavy-duty use: 15KW.
Typical motor power in 400 V at normal use: 18.5kw.
Typical motor power in 460 V at normal use: 25hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 38A.
Wall-mounted units.
Typical motor power in 460 V at heavy-duty use: 20HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 31A.
Frame size: R3.
ABB Inverter ACS355-03X-46A2-2
Product Name: Inverter.
Model: ACS355-03X-46A2-2.
3-phase AC supply, 200 to 240 V.
Frame size: R4.
Typical motor power in 460 V at normal use: 15.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 46.2A.
Typical motor power in 400 V at normal use: 11.0kw.
Current ratinG represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
Product Name: Inverter.
Model: ACS355-03X-46A2-2.
3-phase AC supply, 200 to 240 V.
Frame size: R4.
Typical motor power in 460 V at normal use: 15.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 46.2A.
Typical motor power in 400 V at normal use: 11.0kw.
Current ratinG represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
ABB Inverter ACS355-03X-04A1-4
Product Name: Inverter.
Model: ACS355-03X-04A1-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 1.5kw.
This code states the factory installed SW variants to the drive.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 4.1A.
Frame size: R1.
Current ratinG represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 460 V at normal use: 2.0hp.
Product Name: Inverter.
Model: ACS355-03X-04A1-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 1.5kw.
This code states the factory installed SW variants to the drive.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 4.1A.
Frame size: R1.
Current ratinG represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 460 V at normal use: 2.0hp.
ABB Inverter ACS800-01-0020-3
Product Name: Inverter.
Model: ACS800-01-0020-3.
UN = 400 V (RanGe 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 34A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 46A.
Typical motor power in no-overload use: 15KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in light-overload use: 15Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 23A.
Typical motor power in heavy-duty use: 11KW.
Frame size: R3.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 31A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0020-3.
UN = 400 V (RanGe 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 34A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 46A.
Typical motor power in no-overload use: 15KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in light-overload use: 15Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 23A.
Typical motor power in heavy-duty use: 11KW.
Frame size: R3.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 31A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
ABB Inverter ACS800-01-0006-5
Product Name: Inverter.
Model: ACS800-01-0006-5.
UN = 500 V (RanGe 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 8.1A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 10.8A.
Typical motor power in no-overload use: 4KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 7.7A.
Typical motor power in light-overload use: 4Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 5.6A.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Frame size: R2.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Typical motor power in heavy-duty use: 3KW.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0006-5.
UN = 500 V (RanGe 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 8.1A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 10.8A.
Typical motor power in no-overload use: 4KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 7.7A.
Typical motor power in light-overload use: 4Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 5.6A.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Frame size: R2.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Typical motor power in heavy-duty use: 3KW.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
12566 Results 12/Page Page 180 of 1048 [First Page] << Previous 176 177 178 179 180 181 182 183 184 185 Next >> [Last Page]