Proface USB Front Cable (1 m) CA5-USBEXT-01
Extension cable attachinG USB interface to front panel.

Proface Touch Screen(Rear Mount) PFXGP4401TADR
Product Name: Touch Screen(Rear Mount).
Model: PFXGP4401TADR.
Graphic Display Resolution: 640*480 pixels(VGA).
Display Type and Size: TFT Color LCD(7.5").
SD Card: 1.
Touch Screen: Resistive Film (analog).
Serial Ports (COM2): RS-422/485.
Ethernet: 1.
Serial Ports(COM1): RS-232C.
Programming Memory: 16mb flash EPROM.
Input Voltage: 24 VDC.
Display Colors: 65, 536 Colors(no blink) / 16, 384 Colors(blink).
Display Area: W 153.7 x H 115.8 mm [W 6.05 x H 4.56 in].
Backlight: White LED.

Proface Touch Screen(Rear Mount) PFXGP4401TADRF0C
Product Name: Touch Screen(Rear Mount).
Model: PFXGP4401TADRF0C.
Backlight: White LED.
Display Type and Size: TFT Color LCD(7.5").
SD Card: 1.
Serial Ports(COM1): RS-232C.
Serial Ports (COM2): RS-422/485.
Ethernet: 1.
Touch Screen: Resistive Film (analog).
Programming Memory: 16mb flash EPROM.
Input Voltage: 24 VDC.
Display Colors: 65, 536 Colors(no blink) / 16, 384 Colors(blink).
Display Area: W 153.7 x H 115.8 mm [W 6.05 x H 4.56 in].
Graphic Display Resolution: 640*480 pixels(VGA).
Product is conformal coated.

Proface Accessories CA3-CBLFX/5M-01
cable for directly connectionG an fx series cpu(5m)

Proface Bus Conversion Unit PSL-CONV00
for GP-260x/ 250x Series

ABB Inverter ACS550-01-031A-4
Product Name: Inverter.
Model: ACS550-01-031A-4.
Frame size: R3.
Wall-mounted units.
Typical motor power in 400 V at normal use: 15kw.
Typical motor power in 460 V at normal use: 20hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 31A.
Typical motor power in 400 V at heavy-duty use: 11KW.
Typical motor power in 460 V at heavy-duty use: 15HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 23A.
3-phase supply voltaGe 380 to 480 V.

ABB Inverter ACS550-01-087A-4
Product Name: Inverter.
Model: ACS550-01-087A-4.
Frame size: R4.
Wall-mounted units.
Typical motor power in 400 V at normal use: 45kw.
Typical motor power in 460 V at normal use: 60hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 87A.
Typical motor power in 400 V at heavy-duty use: 37KW.
Typical motor power in 460 V at heavy-duty use: 60HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 72A.
3-phase supply voltaGe 380 to 480 V.

ABB Inverter ACS355-03X-38A0-4
Product Name: Inverter.
Model: ACS355-03X-38A0-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 18.5kw.
Current ratinG represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 38.0A.
Frame size: R4.
Typical motor power in 460 V at normal use: 25.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.

ABB Inverter ACS800-01-0020-2
Product Name: Inverter.
Model: ACS800-01-0020-2.
Frame size: R4.
Rated current available continuously without overloadability at 40 °C: 55A
Maximum output current. Available for 10 s at start, otherwise as lonG as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 72A.
Typical motor power in no-overload use: 15KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 50A.
Typical motor power in light-overload use: 15Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 37A.
Typical motor power in heavy-duty use: 7.5KW.
UN = 230 V (Range 208 to 240 V). The power ratings are valid at nominal voltage 230 V.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

OMRON Super-compact Proximity Sensor E2S-Q22 5M

OMRON Super-compact Proximity Sensor E2S-Q13B 1M

OMRON Cylindrical Proximity Sensor E2K-X8MY2 2M