ABB Inverter ACS355-01X-02A4-2
Product Name: Inverter.
Model: ACS355-01X-02A4-2.
1-phase AC supply, 200 to 240 V.
Typical motor power in 400 V at normal use: 0.37kw.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 2.4A.
Frame size: R0.
Current rating represents the rated continuous drive output current inside the drive specification.
Typical motor power in 460 V at normal use: 0.5hp.
This code states the factory installed SW variants to the drive.

Mitsubishi Inverter FR-D740-0.75K-CHT
Product Name: Inverter.
Model: FR-D740-0.75K-CHT.
0.75 KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 0.75 kW.
Rated input AC voltage/frequency: Three-phase 380 to 480V 50Hz/60Hz.
Protective structure: Enclosed type (IP20).
Cooling system: Self-cooling.
Approx. mass: 1.3 Kg.

Mitsubishi PLC FX3U-80MR/ES

Mitsubishi Digital - analog conversion unit A68DAI-S1
Model: A68DAI-S1.
DESCRIPTION: D/A CONVERTER UNIT : 8 CHANNELS.
Input (resolution): Output 0 ~ 4000, 0 ~ 8000, 0 ~ 12000: DC0 ~ 20mA.
Conversion rate: 40ms / 8 Channel.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.65kg.

Mitsubishi Inverter FR-E740-0.75K
Product Name: Inverter.
Model: FR-E740-0.75K.
0.75 KW.
Rated voltage: Three-phase 380 to 480V.
Applicable motor capacity: 0.75 kW.
Rated input AC (DC) voltage/frequency: Three-phase 380 to 480V 50Hz/60Hz (283 to 339VDC).
Protective structure: Enclosed type (IP20). IP40 for totally enclosed structure series.
Cooling system: Self-cooling.
Approx. mass: 1.4 Kg.

ABB Inverter ACS800-01-0165-5
Product Name: Inverter.
Model: ACS800-01-0165-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 225A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 326A.
Typical motor power in no-overload use: 132KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 220A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 163A.
Typical motor power in heavy-duty use: 110KW.
Frame size: R6.
Typical motor power in light-overload use: 132Kw.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

Mitsubishi Interface converter FX-232AWC-H

Mitsubishi Inverter FR-A840-02600-2-60
Product Name: Inverter.
Model: FR-A840-02600-2-60.
90KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity(SLD): 132 kW.
Rated input AC voltage/frequency: Three-phase 380 to 500 V 50 Hz/60 Hz.
Cooling system: Forced air cooling.
Approx. mass: 55 Kg.

Mitsubishi Temperature - Digital Conversion Unit A68RD3N
Model: A68RD3N.
8-channel
Wire platinum RTD 3 (Pt100 (JIS C1604-1989, DIN 43760-1980), JPt100 (JIS C1604-1981)).
Conversion rate: 40ms / 1 Channel
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.62kg.

Mitsubishi DC Input Module A1SX80-S1
Product: DC Input Module.
Model: A1SX80-S1.
Outline: 16 points, 24 V DC, 7 mA, response time: 0.5 ms, 16 points/common, positive/negative common, 20-point terminal block, high-speed input.

ABB Inverter ACS550-01-03A3-4
Product Name: Inverter.
Model: ACS550-01-03A3-4.
3-phase supply voltage 380 to 480 V.
Wall-mounted units.
Frame size: R1.
Typical motor power in 460 V at normal use: 1.5hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 3.3A.
Typical motor power in 400 V at heavy-duty use: 0.75KW.
Typical motor power in 460 V at heavy-duty use: 1HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 2.4A.
Typical motor power in 400 V at normal use: 1.1kw.

Mitsubishi GT15 Touch screen GT1585V-STBA