Mennekes Angled plug 3646
Product Name:Angled plug
Part No.:3646.
Ampere:32A.
Poles:4p.
Voltage:230V.
Earth position:9h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:nickel plated contacts.
Protection type IP44.
screw terminals.
nickel plated contacts.
with grommet.

Mennekes Panel mounted receptacle 1468
Product Name:Panel mounted receptacle
Part No.:1468.
Ampere:16A.
Poles:4p.
Voltage:500V.
Earth position :7h.
Hertz 50-60Hz.
Connection technology:Screw terminal.
Contact: standrad.
Protection type IP44.
screw terminals.
suitable for through wiring.
20° inclination.

Mennekes Panel mounted receptacle 1469
Product Name:Panel mounted receptacle
Part No.:1469.
Ampere:16A.
Poles:4p.
Voltage:>50-500V.
Earth position :10h.
Hertz 100-300Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP44.
screw terminals.
suitable for through wiring.
20° inclination.

Mennekes Panel mounted receptacle 1463
Product Name:Panel mounted receptacle
Part No.:1463.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position :6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP44.
screw terminals.
suitable for through wiring.
20° inclination.

Mennekes Panel mounted receptacle 1466
Product Name:Panel mounted receptacle
Part No.:1466.
Ampere:16A.
Poles:4p.
Voltage:230V.
Earth position :9h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP44.
screw terminals.
suitable for through wiring.
20° inclination.

Mennekes Panel mounted receptacle 1461
Product Name:Panel mounted receptacle
Part No.:1461.
Ampere:125A.
Poles:5p.
Voltage:400V.
Earth position :6h.
Hertz 50-60Hz.
Connection technology:screw terminals., TorsionSpringCONTACT.
Contact: standrad.
Protection type IP67.
screw terminals.
TorsionSpringCONTACT.
straight.
receptacles with pilot contact: part no. + index P.

ABB Inverter ACS355-03X-08A8-4
Product Name: Inverter.
Model: ACS355-03X-08A8-4.
3-phase AC supply, 380 to 480 V.
This code states the factory installed SW variants to the drive.
Typical motor power in 460 V at normal use: 5.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 8.8A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 4.0kw.

Mennekes Connector SCHUKO 10846
Product Name:Connector SCHUKO?
Part No.:10846.
Ampere :16A.
Poles:2p+E.
Voltage:230V.
Shutter:no.
Connection technology:Screw terminals.
Contact:standard.
Protection type: IP44.
screw terminals.
with grommet and lid.
for cables up to 3 x 2.5 mm2, up to H07RN-F.

Mennekes Connector AM-TOP 2460
Product Name:Connector AM-TOP?
Part No.2460.
Ampere :32A.
Poles:7P.
Voltage:500V.
Earth position:7h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP67.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
single part body.
cable gland and sealing.
strain relief and protection against kinking.

Mennekes Panel mounted receptacle CEEplus 946
Product Name:Panel mounted receptacle CEEplus?
Part No.946.
Ampere :16A.
Poles：3 p + additional contacts.
Voltage:230V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
with 4 additional contacts.
straight.

ABB Inverter ACS355-03X-03A3-4
Product Name: Inverter.
Model: ACS355-03X-03A3-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 1.1kw.
This code states the factory installed SW variants to the drive.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 3.3A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 460 V at normal use: 1.5hp.

ABB Inverter ACS355-03X-31A0-4
Product Name: Inverter.
Model: ACS355-03X-31A0-4.
This code states the factory installed SW variants to the drive.
Typical motor power in 400 V at normal use: 15.0kw.
Typical motor power in 460 V at normal use: 20.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 31.0A.
Frame size: R4.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
3-phase AC supply, 380 to 480 V.