Mitsubishi Inverter FR-A840-02600-2-60
Product Name: Inverter.
Model: FR-A840-02600-2-60.
90KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity(SLD): 132 kW.
Rated input AC voltage/frequency: Three-phase 380 to 500 V 50 Hz/60 Hz.
Cooling system: Forced air cooling.
Approx. mass: 55 Kg.
Product Name: Inverter.
Model: FR-A840-02600-2-60.
90KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity(SLD): 132 kW.
Rated input AC voltage/frequency: Three-phase 380 to 500 V 50 Hz/60 Hz.
Cooling system: Forced air cooling.
Approx. mass: 55 Kg.
ABB Inverter ACS800-01-0165-5
Product Name: Inverter.
Model: ACS800-01-0165-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 225A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 326A.
Typical motor power in no-overload use: 132KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 220A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 163A.
Typical motor power in heavy-duty use: 110KW.
Frame size: R6.
Typical motor power in light-overload use: 132Kw.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0165-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 225A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 326A.
Typical motor power in no-overload use: 132KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 220A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 163A.
Typical motor power in heavy-duty use: 110KW.
Frame size: R6.
Typical motor power in light-overload use: 132Kw.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mitsubishi Human-Machine Interface GT2715-XTBA
Product Name: Human-Machine Interface.
Model: GT2715-XTBA.
Power supply: 100-240VAC.
Touch panel simultaneous press (2 points). Panel color: Black.
Display device: TFT color LCD 65536 colors.
Screen size: 15 inch.
Resolution: XGA: 1024 × 768 dots.
Display size (W × H): 304.1 × 228.1 mm (12.0 × 8.98 inch).
Backlight: White LED (not replaceable).
Product Name: Human-Machine Interface.
Model: GT2715-XTBA.
Power supply: 100-240VAC.
Touch panel simultaneous press (2 points). Panel color: Black.
Display device: TFT color LCD 65536 colors.
Screen size: 15 inch.
Resolution: XGA: 1024 × 768 dots.
Display size (W × H): 304.1 × 228.1 mm (12.0 × 8.98 inch).
Backlight: White LED (not replaceable).
ABB Inverter ACS550-01-03A3-4
Product Name: Inverter.
Model: ACS550-01-03A3-4.
3-phase supply voltage 380 to 480 V.
Wall-mounted units.
Frame size: R1.
Typical motor power in 460 V at normal use: 1.5hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 3.3A.
Typical motor power in 400 V at heavy-duty use: 0.75KW.
Typical motor power in 460 V at heavy-duty use: 1HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 2.4A.
Typical motor power in 400 V at normal use: 1.1kw.
Product Name: Inverter.
Model: ACS550-01-03A3-4.
3-phase supply voltage 380 to 480 V.
Wall-mounted units.
Frame size: R1.
Typical motor power in 460 V at normal use: 1.5hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 3.3A.
Typical motor power in 400 V at heavy-duty use: 0.75KW.
Typical motor power in 460 V at heavy-duty use: 1HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 2.4A.
Typical motor power in 400 V at normal use: 1.1kw.
ABB Inverter ACS355-03X-01A2-4
Product Name: Inverter.
Model: ACS355-03X-01A2-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 0.37kw.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 1.2A.
Frame size: R0.
Current rating represents the rated continuous drive output current inside the drive specification.
Typical motor power in 460 V at normal use: 0.5hp.
This code states the factory installed SW variants to the drive.
Product Name: Inverter.
Model: ACS355-03X-01A2-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 0.37kw.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 1.2A.
Frame size: R0.
Current rating represents the rated continuous drive output current inside the drive specification.
Typical motor power in 460 V at normal use: 0.5hp.
This code states the factory installed SW variants to the drive.
ABB Inverter ACS355-03X-07A3-4
Product Name: Inverter.
Model: ACS355-03X-07A3-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 3.0kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 7.3A.
Frame size: R1.
Typical motor power in 460 V at normal use: 3.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
Product Name: Inverter.
Model: ACS355-03X-07A3-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 3.0kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 7.3A.
Frame size: R1.
Typical motor power in 460 V at normal use: 3.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
Proface HMI AGP3600-T1-AF-D81C
Product Name: HMI(w/dicrete i/o).
Model: AGP3500-T1-AF-D81C(Source).
Display Type and Size: TFT Color LCD(12.1in).
Graphic Display Resolution: 800*600 pixels(VGA).
Backlight: LED OR CCFL.
Display Area: W248 x H186.5 mm [W9.76 x H7.34 in].
CF Card: 1 slot, type II.
Serial Ports (COM1): RS-232C/422/485.
Touch Screen: Resistive Film(analog).
Display Colors: 65536 COLRS(NO Blink)/16384 colors(blink).
Programming Memory: 16mb flash EPROM.
Input Voltage: 24 VDC.
Ethernet: yes.
Product Name: HMI(w/dicrete i/o).
Model: AGP3500-T1-AF-D81C(Source).
Display Type and Size: TFT Color LCD(12.1in).
Graphic Display Resolution: 800*600 pixels(VGA).
Backlight: LED OR CCFL.
Display Area: W248 x H186.5 mm [W9.76 x H7.34 in].
CF Card: 1 slot, type II.
Serial Ports (COM1): RS-232C/422/485.
Touch Screen: Resistive Film(analog).
Display Colors: 65536 COLRS(NO Blink)/16384 colors(blink).
Programming Memory: 16mb flash EPROM.
Input Voltage: 24 VDC.
Ethernet: yes.
ABB Inverter ACS800-01-0255-5
Product Name: Inverter.
Model: ACS800-01-0255-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 200KW
Frame size: R6.
Typical motor power in light-overload use: 200Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 160KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0255-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 200KW
Frame size: R6.
Typical motor power in light-overload use: 200Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 160KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
611 Results 12/Page Page 8 of 51 [First Page] << Previous 4 5 6 7 8 9 10 11 12 13 Next >> [Last Page]