? Persons trained in the local and national electrical standards must perform AL PDF all tasks associated with
wiring the α Series Controller.
? AL Manual Turn off the Power before performing any wiring AL PDF operations.
? Input
AL and AL PDF AL Manual output cables should not be run through the same multicore cable or share the same wire.
? Cables terminating AL Installation Manual at a screw terminal should be fitted with insulated crimp terminals.
? To avoid damaging the AL Installation Manual wire, do not exceed a maximum torque of 0.5 N?m.
? Do not install in areas with: excessive AL Installation Manual or conductive dust, corrosive or flammable gas, moisture or
rain, excessive heat, regular impact shocks or excessive vibration.
? The connectors must be covered to prevent contact with “Live” wires.
? The α Series Controller must be installed in cabinets which are designed for the assembly of devices
complying to DIN 43880 or in a control box.
? Leave a minimum of 10mm of space for ventilation between the top and bottom edges of the α Series
Controller and the enclosure walls.
? The α Series is not designed to be used in life critical or fail safe applications.
? Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential damage
that may arise as a result of the installation or use of this equipment.
? Please read the α HARDWARE and PROGRAMMING MANUALS for further information.
Mitsubishi GT16-60VLTT Manual PDF.
GT15V-75R1 Manual Mitsubishi GT15V-75R1 Gateway functions Manual .
FX2N-48MR-ES/UL Programming Manual(II) FX2N-48MR-ES/UL Manual.
Mitsubishi FFX2-80MT AL Manual Manual FX2-80MT Programming Manual(Fundamentals).
FX3S-30MR/DS Mitsubishhi AL PDF FX3S-30MR/DS Manual.
Mitsubishi R_PCPU PDF Manual.