Mitsubishi Controller AL2-2PT-ADP Manual PDF

? Please use an isolated Power supply and turn off the Power before any AL2-2PT-ADP PDF wiring
operation is performed.
? Input and Output AL2-2PT-ADP Manual cables should not be run through the same multicore AL2-2PT-ADP PDF cable or AL2-2PT-ADP AL2-2PT-ADP Manual AL2-2PT-ADP PDF
share the same wire.
? Input cable (from sensor to AL2-2PT-ADP) must be less than 10m (32'81'') AL2-2PT-ADP Installation Manual and
the output cable length must be less than 3m (9' 10").
? The wire should be used AL2-2PT-ADP Installation Manual as a single cable or the multicore wires (can be used
with a crimp terminal) should be carefully twisted AL2-2PT-ADP Installation Manual together.
Do not connect a soldered wire end to the AL2-2PT-ADP.
? To avoid damaging the wire, tighten to a torque of 0.5 - 0.6 N?m.
? Do not install in areas with: excessive or conductive dust, corrosive or
flammable gas, moisture or rain, excessive heat, regular impact shocks or
excessive vibration.
? The connectors must be covered to prevent contact with “Live” wires.
? The α2 Series Controller and AL2-2PT-ADP must be installed in a distribution
box or a control cabinet. The distribution box should be equipped with a cover
for the AL2-2PT-ADP module to avoid any possible foreign objects from falling
inside.
? Leave a minimum of 10mm (0.40") of space for ventilation between the top and
bottom edges of the AL2-2PT-ADP and the enclosure walls.
Mitsubishi Motion Controller Q172DSCPU Manual.
Mitsubishi Programmable Controller FX0S-20MR-D Manual.
Mitsubishi Controller AL2-EEPROM-2 Manual PDF.
Mitsubishi Motion controller Q172DSCPU cataalog.
programmable AL2-2PT-ADP Manual controller Mitsubishi MELSEC-Q series Manual PDF.
MMitsubishi AL2-2PT-ADP PDF FX3G-24MR/DS Manual programmable controller.