ABB Inverter ACS550-02-486A-4
Product Name: Inverter.
Model: ACS550-01-486A-4.
3-phase supply voltage 380 to 480 V.
Free-standing units.
Frame size: R8.
Typical motor power in 460 V at normal use: 400hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 486A.
Typical motor power in 400 V at heavy-duty use: 200KW.
Typical motor power in 460 V at heavy-duty use: 350HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 414A.
Typical motor power in 400 V at normal use: 250kw.
Product Name: Inverter.
Model: ACS550-01-486A-4.
3-phase supply voltage 380 to 480 V.
Free-standing units.
Frame size: R8.
Typical motor power in 460 V at normal use: 400hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 486A.
Typical motor power in 400 V at heavy-duty use: 200KW.
Typical motor power in 460 V at heavy-duty use: 350HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 414A.
Typical motor power in 400 V at normal use: 250kw.
ABB Inverter ACS800-01-0205-3
Product Name: Inverter.
Model: ACS800-01-0205-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 160KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in light-overload use: 160Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 132KW.
Frame size: R6.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0205-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 160KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in light-overload use: 160Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 132KW.
Frame size: R6.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
ABB Inverter ACS800-01-0050-3
Product Name: Inverter.
Model: ACS800-01-0050-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 86A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 112A.
Typical motor power in no-overload use: 45KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 80A.
Frame size: R5.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 60A.
Typical motor power in heavy-duty use: 30KW.
Typical motor power in light-overload use: 37Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0050-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 86A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 112A.
Typical motor power in no-overload use: 45KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 80A.
Frame size: R5.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 60A.
Typical motor power in heavy-duty use: 30KW.
Typical motor power in light-overload use: 37Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mitsubishi Inverter FR-A740-280K
Product Name: Inverter.
Model: FR-A740-280K.
280 KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 280 kW.
Permissible AC voltage fluctuation: 323 to 528V 50Hz/60Hz.
Power supply capacity: 417 kVA
Cooling system: Forced air cooling.
Approx. mass: 175 Kg.
Product Name: Inverter.
Model: FR-A740-280K.
280 KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 280 kW.
Permissible AC voltage fluctuation: 323 to 528V 50Hz/60Hz.
Power supply capacity: 417 kVA
Cooling system: Forced air cooling.
Approx. mass: 175 Kg.
OMRON High-speed Counter Module C500-CT041
C500-CT Special I/O Unit High-speed Counter Unit 20 kcps 4 pts C500-CT041.
C500-CT Special I/O Unit High-speed Counter Unit 20 kcps 4 pts C500-CT041.
Mennekes AMAXXS receptacle combination 941142
Product Name:AMAXX?S receptacle combination
Part No.:941142.
Fitted with:1 CEE 32A, 5p, 400V
1 CEE 16A, 5p, 400V
3 x 13A, 2p+E, 230V.
Fusing:1 RCD 63A, 4p, 0.03A
1 MCB 32A, 3p, C
1 MCB 16A, 3p, C
3 MCB′s 13A, 1p, C.
Pre-fuse max:63A.
InA :46A.
RDF:0.75.
Connection/feeder cable:for 1 cable up to 5 x 16mm2.
Enclosure size:520 x 225mm (H x W).
Protection type IP44.
highly resistant to chemicals made of AMELAN?.
with highly heat resistant contact carrier and nickel plated contacts.
pre-wired for installation.
enclosure front cover grey RAL 7000.
hinged to the side.
fusing behind a transparent cover.
Product Name:AMAXX?S receptacle combination
Part No.:941142.
Fitted with:1 CEE 32A, 5p, 400V
1 CEE 16A, 5p, 400V
3 x 13A, 2p+E, 230V.
Fusing:1 RCD 63A, 4p, 0.03A
1 MCB 32A, 3p, C
1 MCB 16A, 3p, C
3 MCB′s 13A, 1p, C.
Pre-fuse max:63A.
InA :46A.
RDF:0.75.
Connection/feeder cable:for 1 cable up to 5 x 16mm2.
Enclosure size:520 x 225mm (H x W).
Protection type IP44.
highly resistant to chemicals made of AMELAN?.
with highly heat resistant contact carrier and nickel plated contacts.
pre-wired for installation.
enclosure front cover grey RAL 7000.
hinged to the side.
fusing behind a transparent cover.
Mennekes Name:Receptacle strip 96227
Product Name:Receptacle strip
Part No.:96227.
Fitted with:3 CEE 16A, 3p, 110V.
Connection/feeder cable:for 1 cable up to 3 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Product Name:Receptacle strip
Part No.:96227.
Fitted with:3 CEE 16A, 3p, 110V.
Connection/feeder cable:for 1 cable up to 3 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Mennekes Connector PowerTOP Xtra 14101
Product Name:Connector PowerTOP? Xtra
Part No.:14101.
Ampere:63A.
Poles:3p
Voltage:110V.
Earth position:4h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT .
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with rubberised grip area.
frame terminals.
with SoftCONTACT.
with highly heat resistant contact carrier.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock.
two safety slides.
products with pilot contact: part no. + index P
Product Name:Connector PowerTOP? Xtra
Part No.:14101.
Ampere:63A.
Poles:3p
Voltage:110V.
Earth position:4h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT .
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with rubberised grip area.
frame terminals.
with SoftCONTACT.
with highly heat resistant contact carrier.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock.
two safety slides.
products with pilot contact: part no. + index P
Mennekes Cepex panel mounted receptacle 4143
Product Name:Cepex panel mounted receptacle
Part No.:4143.
Ampere:16A.
Poles:4p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
scscrew terminals.
with labelling field.
suitable for installation in cable ducts and columns.
Product Name:Cepex panel mounted receptacle
Part No.:4143.
Ampere:16A.
Poles:4p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
scscrew terminals.
with labelling field.
suitable for installation in cable ducts and columns.
Mennekes Cepex panel mounted receptacle 4120
Product Name:Cepex panel mounted receptacle
Part No.:4120.
Ampere:32A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
also suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex panel mounted receptacle
Part No.:4120.
Ampere:32A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
also suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
392 Results 12/Page Page 12 of 33 [First Page] << Previous 8 9 10 11 12 13 14 15 16 17 Next >> [Last Page]