Mennekes Cepex flush mounted receptacle 4125
Product Name:Cepex flush mounted receptacle
Part No.:4125.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
with flush mounted installation box.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex flush mounted receptacle
Part No.:4125.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
with flush mounted installation box.
meeting DIN 18032 standards for ball rebound.
Mennekes Wall mounted receptacle 1419
Product Name:Wall mounted receptacle
Part No.:1419.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position:6h.
Hertz:50-60 Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
internal fixing.
one cable entry at top, two blind cable entries (can be cut out) at bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch..
Product Name:Wall mounted receptacle
Part No.:1419.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position:6h.
Hertz:50-60 Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
internal fixing.
one cable entry at top, two blind cable entries (can be cut out) at bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch..
ABB Inverter ACS800-01-0040-3
Product Name: Inverter.
Model: ACS800-01-0040-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 72A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 86A.
Typical motor power in no-overload use: 37KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 69A.
Typical motor power in light-overload use: 30Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Typical motor power in heavy-duty use: 22KW.
Frame size: R5.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 49A.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0040-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 72A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 86A.
Typical motor power in no-overload use: 37KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 69A.
Typical motor power in light-overload use: 30Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Typical motor power in heavy-duty use: 22KW.
Frame size: R5.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 49A.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mennekes Connector PowerTOP Xtra 14112
Product Name:Connector PowerTOP? Xtra
Part No.:14112.
Ampere:63A.
Poles:5p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTAC.
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with rubberised grip area.
frame terminals.
with SoftCONTACT.
with highly heat resistant contact carrier.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock.
two safety slides.
products with pilot contact: part no. + index P.
Product Name:Connector PowerTOP? Xtra
Part No.:14112.
Ampere:63A.
Poles:5p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTAC.
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with rubberised grip area.
frame terminals.
with SoftCONTACT.
with highly heat resistant contact carrier.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock.
two safety slides.
products with pilot contact: part no. + index P.
Mennekes Wall mounted phase inverter inlet 21241
Product Name:Panel mounted phase inverter inlet
Part No.:21241.
Ampere:32A.
Poles:5p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
with hinged lid.
Product Name:Panel mounted phase inverter inlet
Part No.:21241.
Ampere:32A.
Poles:5p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
with hinged lid.
OMRON Analog Setting Board CQM1H-AVB41
Product name: Analog Setting Board.
Model: CQM1H-AVB41.
Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations and number of Boards: 1 Board can be mounted in either slot 1 or slot 2.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 60 g max.
Product name: Analog Setting Board.
Model: CQM1H-AVB41.
Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations and number of Boards: 1 Board can be mounted in either slot 1 or slot 2.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 60 g max.
Mennekes Cepex panel mounted receptacle 4111
Product Name:Cepex panel mounted receptacle
Part No.:4111.
Ampere:16A.
Poles:3p.
Voltage:110V.
Earth position: 4h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
also suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex panel mounted receptacle
Part No.:4111.
Ampere:16A.
Poles:3p.
Voltage:110V.
Earth position: 4h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
also suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
392 Results 12/Page Page 8 of 33 [First Page] << Previous 4 5 6 7 8 9 10 11 12 13 Next >> [Last Page]