Mennekes Panel mounted inlet 464
Product Name:Panel mounted inlet
Part No.:464.
Ampere:32A.
Poles:3p.
Voltage:230V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP67.
screw terminals.
with hinged lid.

Mennekes Panel mounted receptacle 1464
Product Name:Panel mounted receptacle
Part No.:1464.
Ampere:16A.
Poles:3p.
Voltage:400V.
Earth position :9h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP44.
screw terminals.
suitable for through wiring.
20° inclination.

Mennekes Panel mounted inlet 468
Product Name:Panel mounted inlet
Part No.:468.
Ampere:32A.
Poles:4p.
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP67.
screw terminals.
with hinged lid.

Mennekes Panel mounted inlet 469
Product Name:Panel mounted inlet
Part No.:469.
Ampere:32A.
Poles:4p.
Voltage:500V.
Earth position:7h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP67.
screw terminals.
with hinged lid.

Mennekes Wall mounted phase inverter inlet 3346
Product Name:Wall mounted phase inverter inlet
Part No.:3346.
Ampere:32A.
Poles:4p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
cable entry for 32A devices also possible on the back side.
enclosure base with stamped recess for quick cutting out.

Mennekes Phase sequence test plug 3461
Product Name:Phase sequence test plug
Part No.:3461.
Ampere:32A.
Poles:4p
Voltage:500V.
Earth position:7h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
to VDE 0413, part 7, DIN-EN 61557-7.

Mennekes Connector ProTOP 646
Product Name:Connector ProTOP
Part No.:646.
Ampere:32A.
Poles:5p
Voltage:500V.
Earth position:7h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock and safety slide.

Mennekes Connector AM-TOP 546
Product Name:Connector AM-TOP?
Part No.:546.
Ampere:16A.
Poles:4p
Voltage:>50-500V.
Earth position:10h.
Hertz 100-300Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP67.
screw terminals.
single part body.
cable gland and sealing.
strain relief and protection against kinking.

Mennekes AMAXX receptacle combination 941464
Product Name:AMAXX? receptacle combination
Part No.:941464.
Fitted with:6 french/belg. standard 16A. 2p+E, 230V.
Fusing:1 RCD 40A. 4p. 0.03A
3 MCB′s 16A, 1p+N, C
1 off button
1 indicator light.
Pre-fuse max:100A
InA :16A.
RDF:1.
Enclosure size:520 x 225 mm (H x W).
Protection type IP44.
pre-wired for installation.
hinged to the side.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.

Proface Touch Screen(Rear Mount) PFXGP4601TADRFOC
Product Name: Touch Screen(Rear Mount).
Model: PFXGP4601TADRFOC.
Graphic Display Resolution: 800*600 pixels(SVCA).
Display Type and Size: TFT Color LCD(12.1").
SD Card: 1.
Display Colors: 65, 536 Colors(no blink) / 16, 384 Colors(blink).
Serial Ports (COM2): RS-422/485.
Ethernet: 1.
Touch Screen: Resistive Film (analog).
Programming Memory: 32mb flash EPROM.
Input Voltage: 24 VDC.
Serial Ports(COM1): RS-232C.
Display Area: W 246.0 x H 184.5 mm [W 9.69 x H 7.26 in].
Backlight: White LED.
Product is conformal coated.

ABB Inverter ACS355-03X-07A5-2
Product Name: Inverter.
Model: ACS355-03X-07A5-2.
3-phase AC supply, 200 to 240 V.
Typical motor power in 400 V at normal use: 1.5kw.
Typical motor power in 460 V at normal use: 2.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 7.5A.
This code states the factory installed SW variants to the drive.

ABB Inverter ACS355-03X-09A8-2
Product Name: Inverter.
Model: ACS355-03X-09A8-2.
Current rating represents the rated continuous drive output current inside the drive specification.
Typical motor power in 400 V at normal use: 2.2kw.
Typical motor power in 460 V at normal use: 3.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 9.8A.
Frame size: R2.
3-phase AC supply, 200 to 240 V.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.