Home >> Products >> Mennekes >> Industrial plugs and sockets >> Special plugs and sockets
Mennekes Cepex grounding-type mounted receptacle 4904
Product Name:Cepex grounding-type mounted receptacle
Part No.:4904.
Ampere :16A.
Poles:2P.
Voltage:230V.
Shutter:no.
Protection type:IP44.
french-belgian standard.
screw terminals.
for installation in cable ducts and collumns.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex grounding-type panel wall receptacle 4900
Product Name:Cepex grounding-type panel wall receptacle
Part No.:4900.
Ampere :16A
Poles:2P.
Voltage:230V.
Shutter:no.
Protection type:IP44.
french-belgian standard.
screw terminals.
one cable entry at top with M 25 stub, one M 25 blind entry (can be cut out) at bottom, one M 20 entry (can be cut out) at the back side, for cables from 7 bis 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex surface mounted duplex socket 4281
Product Name:Cepex surface mounted duplex socket
Part No.:4281.
Ampere :16A.
Poles:2P.
Voltage:230V.
Shutter:no.
Protection type:IP44.
French/Belgian standard.
screw terminals.
1 x M 20 plugged at top, 2 x M 25 to be cut out at the bottom, 2 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
Mennekes Wall mounted receptacle 733
Product Name:Wall mounted receptacle
Part No.733.
Ampere :16A.
Poles:7P.
Voltage:230V.
Earth position:9h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
internal fixing.
one cable entry at the top, two blind entries (can be cut out) at the bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch.
Mennekes Wall mounted receptacle 735
Product Name:Wall mounted receptacle
Part No.735.
Ampere :32A.
Poles:7P.
Voltage:230V.
Earth position:9h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
internal fixing.
one cable entry at the top, two blind entries (can be cut out) at the bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch.
Mennekes Wall mounted receptacle 734
Product Name:Wall mounted receptacle
Part No.734.
Ampere :16A.
Poles:7P.
Voltage:400V.
Earth position:6h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
internal fixing.
one cable entry at the top, two blind entries (can be cut out) at the bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch.
Mennekes Wall mounted receptacle 736
Product Name:Wall mounted receptacle
Part No.736.
Ampere :32A.
Poles:7P.
Voltage:400V.
Earth position:6h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
internal fixing.
one cable entry at the top, two blind entries (can be cut out) at the bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch.
Mennekes Wall mounted receptacle 1035
Product Name:Wall mounted receptacle
Part No.1035.
Ampere :32A.
Poles:7P.
Voltage:500V.
Earth position:7h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
internal fixing.
one cable entry at the top, two blind entries (can be cut out) at the bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch.
Mennekes Wall mounted receptacle 1040
Product Name:Wall mounted receptacle
Part No.1040.
Ampere :32A.
Poles:7P.
Voltage:500V.
Earth position:7h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
internal fixing.
one cable entry at the top, two blind entries (can be cut out) at the bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch.
Mennekes Wall mounted receptacle 3240
Product Name:Wall mounted receptacle
Part No.3240.
Ampere :16A.
Poles:7P.
Voltage:230V.
Earth position:9h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP67.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
4 external fixings.
one cable entry at top, one blind cable entry (can be cut out) at the bottom.
receptacles are designed for adding an auxiliary contact switch.
Mennekes Wall mounted receptacle 2818
Product Name:Wall mounted receptacle
Part No.2818.
Ampere :32A.
Poles:7P.
Voltage:230V.
Earth position:9h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP67.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
4 external fixings.
one cable entry at top, one blind cable entry (can be cut out) at the bottom.
receptacles are designed for adding an auxiliary contact switch.
Mennekes Wall mounted receptacle 2746
Product Name:Wall mounted receptacle
Part No.2746.
Ampere :16A.
Poles:7P.
Voltage:400V.
Earth position:6h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP67.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
4 external fixings.
one cable entry at top, one blind cable entry (can be cut out) at the bottom.
receptacles are designed for adding an auxiliary contact switch.
442 Results 12/Page Page 4 of 37     << Previous 1 2 3 4 5 6 7 8 9 10 Next >> [Last Page]